Equipment
Copyright Tieling Dongsheng Petroleum Machinery Co., Ltd. All rights reserved 辽ICP备14009156号-1
Address: No. 9 Liaohai Road, Yinzhou District, Tieling, Liaoning.
Phone:024-72865567 024-74567281
Cell phone:13904108972
Mailbox:dssydssy@163.com
Contact
News center
Service phone:
About us
Product
Steam injection thermal column pump
Steam injection pump is developed according to the characteristics of the heavy oil lifting, the difference of the normal work process of this pump from the common pump is that it can be used for special well conditions, such as deviated well and horizontal well etc. When steam injection, lifting the sucker rod, the plunger will lift accordingly, when the plunger is higher than the sealed chamber about 200 mm, the steam injection hole of the sealing tube and the upper tubing string will be linked together, thus steam injection operation can be achieved.
After the completion of the steam injection operation, the sucker rod fall back, the plunger will also be back to work location. At this point, the plunger enter the pump barrel and seal the steam injection hole, after adjust the impingement distance, sucker rod pump system can return to the working state.
The operation mode of this kind of pump is the same as subsurface tubing pump.
Pump bore (mm) |
Length of plunger (m) |
Length of barrel (m) |
Size of connecting Tubing (in) |
Range of Stroke (m) |
Pump constant |
Size of connecting sucker rod |
Max outside diameter (mm) |
44 |
|
|
2 7/8 TBG |
|
2.233 |
CYG19 |
88.5 |
57 |
4.2~7.8 |
1.2+1.2 |
2 7/8 TBG |
3.0~6.0 |
3.692 |
CYG19 |
88.5 |
70 |
|
|
3 1/2 TBG |
|
5.515 |
CYG22 |
108 |